Go Back

BLOCK-PRINTED TEA TOWELS DIY

Author: Roseanne Carrara, Smelling Salts Journal

Ingredients

  • For sources and product recommendations, see NOTES, below.
  • Paper and Pencil or Washable Marker for Sketching Your Design
  • Flour Sac Tea Towels ironed
  • Linoleum Carving Blocks* [We used 2.75 x 4.5 in Speedy Cut Lino Blocks. But you can also use Potatoes! or Pre-made Rubber Stamps!]
  • Screen Printing Ink or Fabric Paint*
  • Spoon [one you can wash or compost]
  • Linoleum cutting tips and handles* [or Cookie Cutters for your potatoes!]
  • X-Acto knife [optional]
  • Twine [optional]
  • Brayer or Paint Roller*
  • A Piece of Plexiglass or glass from an old frame on which to Roll Ink [or a small dollar-store paint tray]
  • Iron
  • Parchment Paper
  • *If you don’t have a lot of these items I highly recommend the Speedball Beginner Block Printing Kit! See Notes, below.

Instructions

  • Print a design to the size of your block to use as inspo. [I like to print mine out in reverse, so that I can see exactly what I'll be sketching onto the block] OR, in pencil, sketch your design on a piece of paper.
  • Sketch your design in washable marker right onto the block. [Remember, your print will be a mirror image of what you draw here!] OR, place your pencilled design face down on the linoleum block and rub the back of the piece of paper with a credit card or transit pass to transfer the design onto the block.
  • Carve the outline of your shape with linoleum carving tools. [Whatever remains raised will print on the towel — in reverse!]
  • If desired, use an X-Acto knife to cut the shape out of a larger linoleum block. [I don't bother.]
  • Spread the ironed tea towel on a flat surface. [You might want to line that surface with craft paper to avoid damaging the surface with ink that bleeds through the towel. Note, the ink we use is washable until iron-set.]
  • If desired, use lengths of twine to grid the tea towel to produce equal sized zones for your block prints. [I used 8 lengths of twine to grid my tea-towel into 25 zones.]
  • Place about a teaspoon ink or fabric paint on your plexi-glass and use the brayer to roll a thin layer of ink across the glass.
  • Roll the inked brayer over the stamp to coat the raised image evenly.
  • Place the inked block on the towel and press down firmly with fingertips or palms.
  • Repeat the inking and stamping process as desired. [Try regular spacing or flirt with an irregular pattern. Try mixing colours or using multiple stamps. ]
  • Allow the ink to dry for an hour.
  • Set the ink with an iron by covering the prints with parchment and pressing for 3-5 minutes. [Consult the directions on your ink/paint for proper heat setting and time.]
  • Enjoy!